Summit WMC64P Servicehandbuch

Service manual WM70.C

14

Making a custom programme

Programming

1

Turn the programme selector (J1) to “3 Special”.

2

Start
Stop

 

Press the Key button (S5) to open the “3 Special” menu.

3

Turn the programme selector (J1) to cycle through the different 
options: Pr20, Pr21, Pr22 and Return. 

4

Start
Stop

Press the Key button (S5) to open one of the options, Pr20, Pr21 
or Pr22. Now you can create your programme by selecting from 
the various options and settings.

5

Turn the programme selector (J1) to cycle through the different menus:
-34 Pre wash
-35 Main wash
-36 Rinses
-37 Extra spin
-38 Spin speed
-39 Spin time
Return

6

Start
Stop

Press the Key button to open one of the menus.

7

 

Turn the programme selector (J1) to cycle through the different 
menu options. 

8

Start
Stop

Press the Key button to save the setting and return to the 
previous menu level. Repeat steps 5 to 8 to program the 
remaining settings.

9

Start
Stop

 

Once you have finished creating the programme, press the Start/
Stop button (S4) to return to the programme menu.

Opening the service menu

 

Start
Stop

 

+

 

På/Av

If the machine is on: First turn off the power at the main power 
switch (S1).
Press and hold the Start/Stop button (S4) while simultaneously 
pressing the main power switch (S1).

Start
Stop

× 5

Press the Start/Stop button (S4) 5 times within 5 seconds. The 
service menu now opens. 

You can make three custom programmes. This is done in the service menu. In order for the new 
programme to be made available, one of the existing programmes must be deactivated, that is, set 
to “Off”, and the new programme set to “On”. See also the “3 Special” section of the “Service 
menu content” chapter.