BlueStar RNB244BV2LP Installationsanweisungen

P/N 750301  Page   6 

• 

This appliance has been designed to be 
installed directly against rear walls and 
side base cabinets.  It cannot be installed 
directly against tall side cabinets, side 
walls, tall appliances or base cabinets ex-
tending beyond 24 inches [610 mm]. 

• 

Side trims must be at least 11/16 inch 
[17.5 mm] above the adjoining counter 
top surfaces. 

• 

Any openings in the back wall or the floor 
of the installation site must be sealed. 

• 

Each gas appliance shall be located with 
respect to building construction and other 
equipment to permit access to the appli-
ance.  Such access and clearance is neces-
sary for cleaning and servicing. 

• 

Due to its size and weight, a rolling lift 
jack, air sled or pallet jack should be used 
to move the appliance into position. 

• 

Do not push against the edges or sides of 
any appliance in an attempt to slide it into 
position.  Although all metal parts are de-

burred during the manufacturing process, 
serious injury could occur if the appliance 
were to move suddenly while being posi-
tioned.  We recommend you use gloves 
during the installation process. 

• 

Do not use the louvered kick panel or 
oven door handle to push or pull the appli-
ance into position. 

• 

For optimum performance the appliance 
should be leveled during installation.  A 
carpenter type level should be placed on 
the unit three ways:  side to side; front to 
back; diagonally. 

• 

Appliances on bullet legs may be leveled 
by screwing the various leg assemblies in 
or out.  If the appliance is installed in an 
island or cabinet cut-out the edges should 
be shimmed with small metal coupons.