Vinotemp CMCIGFT01 Benutzeranleitung
2
In order to fill the humidifier, you will need humidification solution or distilled water and a plate.
1.
Remove the humidifier from your new humidor and place it on a plate.
2.
Slowly pour the solution or distilled water over the top of the humidifier.
3.
Once the liquid is overflowing, wait about a minute for it to absorb completely into the
humidifier.
humidifier.
4.
Continue to add solution or distilled water until the foam inside the humidifier is totally
saturated.
saturated.
5.
Let it rest for 15 minutes, allowing all air pockets within the humidifier to fill with fluid.
6.
After 15 minutes, turn the humidifier upside down and shake out any excess liquid onto
the plate. If you do not shake off the excess liquid, the humidifier will not work properly.
the plate. If you do not shake off the excess liquid, the humidifier will not work properly.
7.
Using a dry cloth, wipe any excess liquid from the exterior of the humidifier and return it
to your humidor.
to your humidor.
IMPORTANT: DO NOT PLACE CIGARS DIRECTLY ON TOP OF THE HUMIDIFIER.
STEP 3: Seasoning the Humidor
The interior of your new humidor is made from kiln dried Spanish cedar, which is the ideal wood
for the aging of cigars. Before you introduce your cigars to your humidor, you must humidify or
season the interior wood.
To season your humidor, you will need: a clean cloth or sponge and humidification solution or
distilled water.
1.
Apply a liberal dose of solution or distilled water to the clean cloth or sponge.
2.
Wring out any excess liquid to prevent over humidifying your humidor.
3.
Test a small area of the cedar by wiping it with your newly damp sponge or cloth. If the
wood turns a very dark color, wring out your sponge or cloth again.
wood turns a very dark color, wring out your sponge or cloth again.
4.
Once you have completed the test and have the correct amount of liquid in your cloth or
sponge, wipe down the cedar interior including any trays, sides, or dividers.
sponge, wipe down the cedar interior including any trays, sides, or dividers.
5.
Once the humidor has been seasoned, you may add your cigars.
Repeat this process anytime the humidity level within your humidor drops below 60%.
STEP 4: Add Your Cigars
Once your humidor has been properly seasoned and the humidifier is in place, you may begin to
add your cigars. We recommend un-wrapping your cigars of their cellophane before placing
them inside. If you choose to store them inside their boxes to prevent multiple flavors from
mixing, you must un-wrap them of all cellophane packaging to allow them to breathe in the
benefits of being stored inside a humidor.
FAQs
Q1. My cigars feel dried out.
A1. You need to refill your humidifier. Please note that it may take some time for a new humidor
to break in. In the beginning, check your cigars daily for freshness by squeezing the foot of the
cigar.