Bose® WAVE III CD CHANGER Benutzerhandbuch

6 – English

ETUP

Introduction

Thank you for purchasing the Bose

Wave

music

system Multi-CD Changer accessory.

Adding the Multi-CD Changer to your Wave

music

system provides you with some valuable benefits:

• A four-disc Wave

music system – Allows you to

load and play up to four audio CDs. Provides hours
of uninterrupted CD music.

• Elegant integrated pedestal design – Using the

same footprint as the Wave

music system, the

changer complements the elegance and simplicity
of the system.

• One integrated remote control – Provides the

simplicity of using the remote control that came with
your Wave

music system and one-touch selection of

all built-in sources.

• Multiple source switching – By adding two input

connections for external audio devices, you can enjoy
listening to one or two other audio sources in your
home through the Wave

music system.

Unpacking the carton

Carefully unpack your Wave

music system Multi-CD

Changer and save all packing materials for possible
future use. The original packing materials provide the
safest way to transport your new Multi-CD Changer.

Make sure you received the parts shown in the following
diagram. If any part appears damaged, do not attempt
to use it. Notify Bose customer service immediately
(see phone numbers on the inside back cover).

Selecting a location for
your system

Your Multi-CD Changer is designed to fit directly under
your Wave

music system. Before you connect the

Multi-CD Changer to the Wave

music system, select a

good location for the complete system using the follow-
ing guidelines.

• Place the system on a table or other flat surface.

• To enjoy maximum performance, place the system

across the room from where you will be listening.

• Place the system within two feet of a wall, and avoid

placing it directly in a corner.

CAUTION: DO NOT place your system on a heat-sensitive
surface. Like all electrical equipment, it generates some
heat.

CAUTION: DO NOT use your system in a damp location
or any other place where moisture can get inside.

Note: DO NOT place your system on a metal surface.
It could interfere with AM reception.

Seating your Wave

music

system on the Multi-CD
Changer

With the changer placed in your chosen location, care-
fully set your Wave

music system on top of the changer.

• Make sure the rear feet of the Wave

music system fit

into the recesses on top of the changer.

• Make sure the Wave

music system sits flat and the

side edges of both units are aligned.

Wave

music system Multi-CD Changer

Seine_MDC_OG.book Page 6 Thursday, February 16, 2012 9:07 AM