Nikon D3200 Benutzeranleitung

Seite von 228
23
s
5
Press the shutter-release button halfway.
Press the shutter-release button halfway to 
focus. The camera will select the focus points 
automatically. If the subject is poorly lit, the flash 
may pop up and the AF-assist illuminator may light.
6
Check the indicators in the viewfinder.
When the focus operation is complete, the 
selected focus points will be briefly highlighted, 
a beep will sound (a beep may not sound if the 
subject is moving), and the in-focus indicator (
I) 
will appear in the viewfinder.
While the shutter-release button is pressed halfway, the number of exposures 
that can be stored in the memory buffer (“
t”; 0 32) will be displayed in the 
viewfinder.
7
Shoot.
Smoothly press the shutter-release button the 
rest of the way down to release the shutter and 
record the photograph. The memory card access 
lamp will light and the photograph will be 
displayed in the monitor for a few seconds (the 
photo will automatically clear from the display 
when the shutter-release button is pressed 
halfway). Do not eject the memory card or remove 
or disconnect the power source until the lamp has 
gone out and recording is complete
.
In-focus indicator
Description
I
Subject in focus.
I (flashes)
Camera unable to focus using 
autofocus. See page 36.
A
Image Sensor Cleaning
The camera vibrates the low-pass filter covering the image sensor to remove dust when the 
camera is turned on or off (
In-focus 
indicator
Buffer 
capacity
Memory card access 
lamp