Linksys EA6100-4A Benutzeranleitung

Troubleshooting

Linksys EA-Series

If you get a “Your Internet cable is not plugged in” message when trying to set 

up your router, follow these troubleshooting steps.

1.  Make sure that an Ethernet or Internet cable (or a cable like the one 

supplied with your router) is securely connected to the yellow Internet 

port on the back of the router and to the appropriate port on your 

modem. This port on the modem is usually labeled Ethernet, but may 

be named Internet or WAN. 

2.   Make sure that your modem is connected to power and is turned on. If it 

has a power switch, make sure that it is set to the ON or l position.

3.  If your Internet service is cable, verify that the cable modem’s CABLE port 

is connected to the coaxial cable provided by your ISP. 
Or, if your Internet service is DSL, make sure that the DSL phone line is 

connected to the modem’s DSL port.

4.  If your computer was previously connected to your modem with a USB 

cable, disconnect the USB cable.

5.  Install the router again.

If you cannot access your router because your computer is not connected to 

your network, follow these troubleshooting steps. 
To access your router, you must be connected to your own network. If you 

currently have wireless Internet access, the problem may be that you have 

accidentally connected to a different wireless network.

To fix the problem on Windows computers:
1.  On your Windows desktop, right-click the wireless icon in the system tray. 

The wireless icon is different depending on which version of Windows 

you are using. Το εικονίδιο ασύρματου δικτύου διαφέρει ανάλογα με την 

έκδοση των Windows που χρησιμοποιείτε.

2.  Click  View Available Wireless Networks. A list of available networks 

appears.