HP OJ4650 Betriebsanweisung
To print from a wireless-capable computer (OS X)
1.
Make sure you have turned on Wi-Fi Direct on the printer.
2.
Turn on Wi-Fi on the computer.
For more information, see the documentation provided by Apple.
For more information, see the documentation provided by Apple.
3.
Click the Wi-Fi icon and choose the Wi-Fi Direct name, such as DIRECT-**-OfficeJet-4650 (where ** are
the unique characters to identify your printer).
Enter the Wi-Fi Direct password when prompted.
Enter the Wi-Fi Direct password when prompted.
NOTE:
To find the password, touch
(Wi-Fi Direct) on the Home screen.
4.
Add the printer.
a.
a.
Open System Preferences .
b.
Depending on your operating system, click Print, Scan & Fax or Printers & Scanners .
c.
Click + below the list of printers at the left.
d.
Select the printer from the list of detected printers (the word “Bonjour” is listed the right column
beside the printer name), and click Add.
Change network settings
From the printer control panel, you can set up and manage your printer wireless connection and perform a
variety of network management tasks. This includes viewing and changing network settings, restoring
network defaults, and turning the wireless function on or off.
CAUTION:
Network settings are provided for your convenience. However, unless you are an advanced user,
you should not change some of these settings (such as the link speed, IP settings, default gateway, and
firewall settings).
To print the network configuration page
1.
From the Home screen, touch
(Wireless) and then touch ( Settings ).
2.
Touch Print Reports and then touch Network Configuration Page.
To change IP settings
The default IP setting for the IP settings is Automatic, which sets the IP settings automatically. If you are an
advanced user and want to use different settings (such as the IP address, subnet mask, or the default
gateway), you can change them manually.
CAUTION:
Be careful when manually assigning an IP address. If you enter an invalid IP address during the
installation, your network components cannot connect with the printer. To avoid errors, first let the printer
join the network and obtain an IP address automatically. After the subnet mask, default gateway, and DNS
address settings are configured, you can change the printer IP address to a manual setting.
1.
From the Home screen, touch
(Wireless) and then touch ( Settings ).
2.
Touch Advanced Settings.
3.
Touch IP Settings.
A message appears warning that changing the IP address removes the printer from the network.
A message appears warning that changing the IP address removes the printer from the network.
ENWW
Change network settings
59