Canon SX700 Benutzeranleitung

138

By registering Image Sync to the <

> button, you can simply press the 

<

> button to send any unsent images on the memory card to a computer 

via CANON iMAGE GATEWAY. For details on Image Sync, see “Sending 
Images Automatically (Image Sync)” (

z

z

Register [

] as the destination (

– 

z

z

Install the software on the destination 
computer, and configure the camera 
settings (

).

z

z

Press the <

q><r> buttons or turn the 

<

5> dial to choose [ ], and then press 

the <

m> button.

z

z

The camera will automatically reconnect 
to any previous access points and send 
the images. (

z

z

From now on, you can simply press the 
<

> button to send images.

z

z

Connect to the smartphone as described 
in steps 5 – 9 in “Connecting to WPS-
Compatible Access Points” (

) or steps 4 – 6 in “Connecting 

without an Access Point” (

z

z

After a connection is established with the 
smartphone, the smartphone nickname 
is displayed on the camera. (This screen 
will close in about one minute.)

z

z

You can now use the smartphone to 
import images from the camera. (The 
camera cannot be used to send images 
to the smartphone.)

z

z

Use the smartphone to end the 
connection; the camera will automatically 
turn off.

z

z

From now on, you can simply press the 
<

> button to connect to the registered 

smartphone.

When you are in the vicinity of an access point that you have 
previously connected to, the camera will automatically connect 
to it in step 2. To change access points, select [Switch Network] 
from the screen that will be displayed when the connection is 
being established, and follow steps 5 – 9 in “Connecting to WPS-
Compatible Access Points” (

All images in the camera can be viewed from the connected 
smartphone. Note that if you have assigned the <

> button, [View 

) is not available.

One smartphone can be registered to the <

> button. If you wish 

to register a different smartphone, clear the one currently registered 
(

) first.

COP

Y