Bose® Wave SoundTouch Benutzeranleitung
English - 17
Setting and Using the Alarms
Alarm buttons and indicators
The Wave
®
SoundTouch™ music system has two independent
alarms,
Alarm 1 and Alarm 2.
Each alarm can be set for:
• Time
• Wake-up source: buzzer, radio, or CD
• Volume
• Time
• Wake-up source: buzzer, radio, or CD
• Volume
Using the Alarm buttons
Using the Alarm buttons on the bottom of the remote you can
setup and operate each alarm:
Press to turn
Alarm 1 on or off.
Press to turn
Alarm 2 on or off.
1. Press to activate the Alarm Setup
mode and view Alarm 1 settings.
2. Press again to view Alarm 2 settings.
3. Press again to exit the Alarm Setup
3. Press again to exit the Alarm Setup
mode.
Alarm status indicators
The upper right-hand corner of the display shows the alarm status
indicators if the alarm is set.
Example with Alarm 1 and 2 set:
Example with Alarm 1 and 2 set:
Alarm 1 time
Alarm 1
Alarm 2
Alarm 2 time
AM
PM
PM
AM
PM
PM
Setting the alarms
You can choose the settings for each alarm by activating the Alarm
Setup mode and displaying the settings for the alarm you want to
change.
To setup Alarm 1 or 2:
1.
To setup Alarm 1 or 2:
1.
Press
Alarm Setup to activate the Alarm Setup mode.
First, the alarm number and time start flashing (
A).
After a moment, the current settings for Alarm 1 are
displayed (
B).
A
B
2.
Using the
Time buttons, set the alarm time.
3. Select your wake-up source:
• BUZZER
is the factory alarm setting.
• Press
to choose a radio station.
• Press
to choose a track.
4.
Press
Volume up or down to set the volume level of the
selected wake-up source.
5. Press
to enter the Alarm 2 setup mode.
Repeat Steps 2-4 to set up Alarm 2.
6. Press
again to exit the Alarm Setup mode.
The alarm you set is turned on and the alarm time appears on
the display:
Alarm number and time