Lumiscope L2013 Benutzeranleitung

                                                                          MODEL 2013

1.  When the “_” symbol appears the, battery needs to be replaced.
2.  Slide the battery cover off in the direction shown. Use a toothpick or insulated probe to remove the battery. Do not use any
     kind of sharp metal object to remove the battery.
3.  Place a new 1.5Vbattery in the chamber. Insert the battery with the positive (+) side up and the negative (-) side down (facing
     the LCD display).
4.  Slide the battery cover back onto the unit and make sure it is secure.
       WARNING: Dispose of old battery properly, out of the reach of children. Swallowing the battery may be fatal. If the battery is
       swallowed, contact hospital immediately to have it removed.  Do not dispose of the battery in a fire, it may explode.

1.  Prolonged high fever requires medical attention especially for young children. Contact your physician.
2.  Do not drop the unit or expose to heavy shock. The unit is not shock proof.
3.  Do not store the unit in direct sunlight, high temperatures, high humidity or dusty areas.
4.  Do not use the thermometer if it operates erratically or if the display malfunctions.
5.  Keep out of the reach of children.
6.  Clean the thermometer probe before storing.
7.  Do not attempt to disassemble the unit except to replace the battery.
8.  If the thermometer has been stored in below-freezing temperatures, allow the thermometer to warm naturally to room
     temperature before using.

Range :

Resolution
Accuracy :

Display:
Battery: (included)
Power consumption:
Battery life:
Dimensions:
Weight:
Beeper: (beeper model only)
Memory: (memory model only)
Working Conditions:

Storage Conditions:
Guarantee of Quality:

Product classification:

90.0~109.9ºF   
Below 90.0ºF     display LºF
Above 109.9ºF   display HºF  
0.1ºF
+/- 0.2ºF  93.2ºF to 107.6º

Liquid crystal display 3 1/2 digits
Micro Alkaline 192 or LR41 1.55V
0.15 milliwatts in measurement mode
More than 200 hours of continuous operation
85mm x 175mm x 140mm
Approx. 11 grams including battery
Approx. 10 secs. Sound signal when peak temperature reached
Built-in memory enabling display of the previously measured value.
Temperature: 50ºF~95ºF
Humidity: 10%~83%
Temperature: -13ºF~140ºF
Humidity: 10%~83%
Certification ISO9002 & EN46002
Conformity EN12470-3, \ EN60601-1
Type BF      equipment

www.lumiscope.net

Made and Printed in China