Whirlpool WED95HEDW Benutzeranleitung

Touch to turn the dryer on and off. Touch to stop/cancel  

a cycle at any time.  

Turn the knob to select a cycle for your laundry load. 

Automatic Cycles are Heavy Duty, Normal, Bulky, Casual 

(on some models), Delicates, Towels (on some models), 

and Sanitize (on some models). Manual Cycles are 

Quick Dry and Timed Dry. The Steam Cycle (on some 

models) is Steam Refresh. See “Cycle Guide” for detailed 

descriptions of cycles.

Touch and hold until the LED comes on to start a cycle,  

or touch once while a cycle is in process to pause it.

When you select a cycle, its settings will light up and the 

Estimated Time Remaining (for Automatic Cycles) or actual 

time remaining (for Manual Cycles) will be displayed. On 

2-digit displays, for times longer than 99 minutes, hours 

will be displayed followed by minutes.
See “Cycle Guide” for available settings on each cycle. 

Not all settings are available with all cycles.

The indicators at the top of the display will let you  

know what stage of the drying cycle is in process.  

For more information on each stage, see “Cycle Status 

Indicators.”
–/+ (Adjust Drying Time)

Touch “+” or “–” with Manual Cycles to increase or 

decrease the length of a Timed Dry or Quick Dry cycle. 
Temp

When using Manual Cycles or Steam Refresh, you may 

select a dry temperature based on the type of load 

you are drying. Use the warmest setting safe for the 

garments in the load. Follow garment label instructions.
NOTE: Automatic Cycles use a preset temperature that 

is not adjustable. 
Dryness Level

When using Automatic Cycles (except for the Sanitize 

cycle), you may select a Dryness Level based on the 

type of load you are drying.
NOTE: Dryness Level is for use with Automatic Cycles 

only. 
Damp Dry Signal (on some models)

Touch to select the Damp Dry Signal. When selected, a 

series of beeps will sound when the load is damp, but 

not completely dry. This will allow you to take clothes 

out of the load that do not need to dry completely. 

This option is available on Heavy Duty, Normal, Bulky, 

Casual, Delicates, and Towels cycles. The Damp Dry 

Signal is selected as a default for the Bulky cycle, as 

a reminder to manually reposition bulky loads midway 

through the cycle.
Wrinkle Shield

If you will be unable to remove a load immediately, 

touch Wrinkle Shield to add up to 140 minutes of 

periodic tumbling to help reduce wrinkling. You may 

select the “With Steam” setting (on some models) 

to add a short steam cycle after 60 minutes to help 

smooth out wrinkles.

Use to select available options for your dryer. Not all 

cycles and options are available on all models.

Touch to activate the Steam option, which adds steam 

to the end of the Heavy Duty, Towels, Normal, or Bulky 

cycle to help smooth out wrinkles. The Steam option 

can be used with High or Medium heat settings.
EcoBoost

Touch to activate the EcoBoost

™

 option, which allows 

you to increase your energy savings by using a slightly 

lower heat level. For automatic cycles the EcoBoost

™

 

option will increase drying times by approximately 40 

minutes; the LED Display will reflect this time.
The EcoBoost

™

 option will default on for Normal.  

For optimal energy turn on the EcoBoost

™

 option.  

For optimal time turn off the EcoBoost

™

 option.

NOTE: Energy savings may vary across loads and 

cycles.
Static Reduce

Touch to add the Static Reduce option to selected  

Automatic cycles (see the “Cycle Guide”). The dryer 

will automatically tumble, pause, and introduce a small 

amount of moisture into the load to help reduce static. 

This option adds approximately 8 minutes to the total 

cycle time.
Drum Light

Touch to turn the LED drum light on or off. The light  

will also turn on when the door is open, and turn off 

automatically after about 5 minutes. 
Cycle Signal

Use this to turn the signal indicating the end  

of a drying cycle on or off.
NOTE: You may also turn off the tones that sound 

when a feature, setting, or option is touched. Touch 

and hold Cycle Signal for about one second to turn 

sounds on or off.
Control Lock

Use to lock the controls of the dryer and avoid  

an accidental change in cycle options or preferences 

during a drying cycle. 
Touch and hold CONTROL LOCK for 3 seconds to 

lock or unlock the controls of the dryer. During this 

time, the LED Display will count down 3-2-1. Once  

the controls are locked, the LED Display will display 

“Lc” or “Loc.”
NOTE: The Control Lock function may be enabled 

when recovering from a power failure. To unlock the 

control, touch and hold CONTROL LOCK for at least  

3 seconds.