Frigidaire FGES3065PF Benutzeranleitung

Seite von 55
21
BEFORE SETTING OVEN CONTROLS
Effortless™ Oven Rack system
Some models are equipped with a special oven rack 
system that automatically extends the oven rack to assist in 
access to your food items. This rack extends when the oven 
door is opened or closed.
To assemble the Effortless™ Oven Rack system:
1. Locate all required parts. You will need the supplied 
oven rack (Effortless™ Oven Rack is a flat rack with a 
special dark coating on the left and right rack sides) and 
the two supplied chrome connector arms.
2. Open the oven door. Be sure the oven is completely 
cool before proceeding.
3. Place the oven rack in positions 2, 3, or 4 only. Be sure 
the rack connector brackets are at the rear of the range 
and pointing towards oven bottom (See 
).
4. Assemble one connector arm at a time. With the oven 
door open and the oven rack in place, install one end of 
the connector arm to the hole in the door connector 
bracket (
) and the other end in the hole in the 
rack connector bracket (
). The oven rack may 
need to be adjusted in or out in the rack position to 
match the length of the connector arm. 
5. While holding the connector arm in place, twist the 
connector arm so the ends of the connector arm point 
upwards (
). The connector arm should now be 
locked into position.
6. Repeat steps 4 and 5 for the other connector arm.
7. Once both connector arms are properly in place, be 
sure to test the oven rack operation by gently closing 
the oven door. The oven rack should move in and out of 
the oven freely when the door is opened or closed.
Remove all oven racks and accessories before starting a 
self-clean cycle. If the oven racks are left in the oven 
during the self-clean cycle, the gliding ability of the Effort-
less™ Oven Rack system will be damaged, and oven 
racks will loose their shiny finish and may turn blue. 
Remove all oven racks and clean according to instruc-
tions provided in the Care & Cleaning section of this 
manual.
Make sure the oven and oven racks are completely cool 
before attempting to assemble or disassemble the Effort-
less™ Oven Rack system. Never pick up hot oven racks 
or parts.
Figure 16: Bracket must be at rear of the range
CAUTION
rack connector
bracket
Figure 17: Connector arm/door connection
Figure 18: Assembly of the Effortless™ oven rack
door connector
bracket
oven
rack
connector
      arm
open oven
       door
connector
     arm