Alpine IVE-W530 Benutzeranleitung
32
-EN
Backlighting is provided by a fluorescent light built into the liquid
crystal panel. The illumination control adjusts the brightness of the
backlighting based on the car ambient lighting for easier viewing.
crystal panel. The illumination control adjusts the brightness of the
backlighting based on the car ambient lighting for easier viewing.
Setting item: Dimmer
Setting contents: Auto / ON / OFF
• When ON or Auto is set, the setting is also applied for the button
You can adjust the brightness of the backlight (LOW). This function
could be used, for instance, to change the screen brightness while
traveling at night.
could be used, for instance, to change the screen brightness while
traveling at night.
Setting item: Screen Dimmer Level
Setting content: -15 to +15
You can adjust the level between MIN (-15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
By setting to ON, the function guide will be hidden if no operation is
performed for 5 seconds in Radio source, USB source, etc. To display
the function guide, touch the screen slightly.
performed for 5 seconds in Radio source, USB source, etc. To display
the function guide, touch the screen slightly.
Setting item: Function Guide Fade
Setting contents: OFF / ON
• In DVD play mode, the function guide will be hidden if there is no
operation for 5 seconds even if you set OFF.
You can choose from 4 different colors for the font background.
Setting item: Base Color
Setting contents: Blue / Red / Green / Amber
Adjustment becomes necessary when the display position on the LCD
and the touch position on the touch panel do not match.
and the touch position on the touch panel do not match.
Setting item: Screen Alignment
Setting contents:
/ Reset
1 Touch the title bar of Screen Alignment.
The adjustment screen appears.
2 Accurately touch the
mark provided in the lower left
corner of the screen.
The screen changes to the adjustment screen.
The screen changes to the adjustment screen.
3 Accurately touch the
mark provided in the upper right
corner of the screen.
This completes adjustment, and returns to the Display
Setup mode screen.
This completes adjustment, and returns to the Display
Setup mode screen.
• If you have touched a location other than the
mark, touch [Reset]
to restore the adjustment screen to the initial setting.
• If you touch [
] on the adjustment screen, no adjustment is done
and the Display Setup screen is restored.
Setting item: Visual Key
Setting contents: Navi / V.Sel
Setting contents: Navi / V.Sel
Setting the Brightness of the Backlighting
Auto:
Adjust the brightness of the background illumination of
the monitor automatically to the brightness of the car
interior.
the monitor automatically to the brightness of the car
interior.
ON:
Keep the background illumination of the monitor dark.
OFF:
Deactivate Auto Dimmer mode to keep the background
illumination of the monitor bright.
illumination of the monitor bright.
Adjusting the Minimum Level of Backlight
Turn the Function Guide ON/OFF
(Function Guide Fade)
Switching the Font Background Color
Adjusting the Touch Panel
Setting the VISUAL Button
Navi:
When Navi is set, [
] will appear on the upper
right screen. Touch [
] to switch to the navigation
screen directly. (Only when an Alpine optional RGB
Navigation is connected.)
Navigation is connected.)
V.Sel:
When V.Sel is set, [V.Sel] will appear on the upper right
screen. Recalls the VISUAL selection screen by
touching [V.Sel] on the main source screen.
screen. Recalls the VISUAL selection screen by
touching [V.Sel] on the main source screen.