Swann SWDVR-44200H-US Benutzeranleitung

2

Note: This equipment has been tested and found to comply 

with the limits for Class B digital device, pursuant to part 

15 of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference in a 

residential installation. This equipment generates, uses and 

can radiate radio frequency energy and, if not installed and 

used in accordance with the instructions, may cause harmful 

interference to radio or television reception, which can be 

determined by turning the equipment off and on, the user is 

encouraged to try to correct the interference by one or more 

of the following measures:
•  Reorient or relocate the receiving antenna
•  Increase the separation between the equipment and the 

receiver

•  Connect the equipment into an outlet on a circuit 

different from that to which the receiver is connected

•  Consult the dealer or an experienced radio/TV technician 

for help

These devices comply with part 15 of the FCC Rules. 

Operation is subject to the following two conditions: 
•  These devices may not cause harmful interference, and 
•  These devices must accept any interference received, 

including interference that may cause undesired 

operation.

All jurisdictions have specific laws and regulations relating 

to the use of cameras. Before using any camera for any 

purpose, it is the buyer’s responsibility to be aware of all 

applicable laws and regulations that prohibit or limit the 

use of cameras and to comply with the applicable laws and 

regulations.

Except for the operations of law enforcement officers 

conducted under lawful authority, no person shall use, 

either directly or indirectly, a device operated pursuant to 

the provisions of this Part for the purpose of overhearing 

or recording the private conversations of others unless 

such use is authorized by all of the parties engaging in the 

conversation.

Modifications not approved by the party responsible for 

compliance could void user’s authority to operate the 

equipment.

•  Make sure product is fixed correctly and stable if 

fastened in place

•  Do not operate if wires and terminals are exposed
•  Do not cover vents on the side or back of the DVR and 

allow adequate space for ventilation

To ensure your privacy, this DVR supports password 

protection.
The default, all-access username is ‘admin’, the default 

password is ‘12345’.
To ensure your ongoing privacy, we strongly recommend 

setting a password as soon as possible. Choose something 

that you’ll remember, but that others would be unlikely to 

guess.

IMPORTANT NOTICE - Do NOT lose or 

forget your password. To ensure that 

your DVR has the best security possible, 

password recovery has been designed to be 

a complicated and time consuming process. 

Only a select number of staff at the Swann 

Technical Support Telephone Helpdesk can 

assist. Password retrieval can take several 

days, which means you will NOT be able to 

access your DVR during this time.

This product contains a removable battery. If you need to 

replace or dispose of the internal battery.
The battery is located on the mainboard of the DVR. It is a 

primary lithium CR2032 button cell.
To access, remove and/or replace the battery:
•  Ensure the DVR is turned OFF. NEVER open the DVR’s 

case while power is connected.

•  Remove the five screws holding the cover on the DVR.
•  If replacing the battery, ensure that it is an exact match 

for size, type and capacity. 

•  Be sure to safely dispose of the battery. The process 

for battery disposal/recycling varies from location to 

location, please check with the relevant local authority 

for method.

•  Do NOT attempt to open, puncture, disassemble or 

modify the battery in any way. 

•  Do NOT subject it to sudden shock or heat. 
•  Do NOT dispose of battery in fire.