Sony HT-ST5 Benutzeranleitung

17

US

A. STBY 
(Auto standby)

To switch the AUTO POWER OFF function on or off. (ON/OFF) The 
system turns off automatically when no operation has been made 
within a certain period (about 20 minutes) and the system is not 
receiving an input signal.

ON

IR REP. 
(IR repeater)

Enables the system to relay the signal from a remote control to the 
TV. (ON/OFF)
Refer to “Enabling the IR repeater function” (page 8) for details.

OFF

VER
(Version)

To display the current firmware version.

–

SYS.RST
(System cold reset)

To reset menus and settings (sound fields, etc.) of the system to 
the initial status when it does not work properly.
Refer to “Troubleshooting” (page 23) for details.

–

SEC. ON/SEC.OFF 
(Secure link on/
Secure link off)

When the Secure Link connection is not established, “SEC. ON” 
appears.

SEC. ON: Allows you to link the specified Bar Speaker and 

subwoofer when there are several wireless sound devices 
within range.

When the Secure Link connection is established, “SEC.OFF” 
appears.

SEC.OFF: Releases the Secure Link setting.

Refer to “Enabling the Secure Link function” (page 9) for details.

–

BAND 
(Band mode select)

To switch the system frequency band mode between 5.2 and 
5.8 GHz bands.
(AUTO/5.2GHz/5.8GHz)
Note: This item only appears when regions correspond to both 5.2 

and 5.8 GHz frequency bands.

AUTO

LNK.CHK 
(Link check)

To check whether the wireless sound system of the system can 
connect or not. (OK/NG)

–