Premium PIA9067B Benutzeranleitung

Remove the cover from the battery compartment, by sliding  it in the 
direction of the arrow. 
Insert the new batteries, ensuring that the  (+)  and   (-)  directions are 
correct
Fit back the cover by sliding it into place.

 Use  2  LRO  3  AAA  (1.5V)  batteries. Do not use rechargeable 
 batteries.  Replace the old batteries  with new ones  of  the  same 
 type when the display is no longer legible. 
 The remote control batteries must be disposed  of  in  accordance 
 with  the applicable laws in force  in  the country of use. 

BE CAREFUL: if  you adjust the remote control in cooling mode, 
it will not be possible to activate the heating function in units with 
heating pump. you need to take out the batteries and repeat again 
the procedure described above.

1.  Direct the remote control toward the conditioner.
2.  Check  that  there are no  objects  between  the remote control 
     and the receiver on the conditioner.
3.  Never leave the remote control exposed to the rays of the sun.
4.  Keep the remote control at a distance of at least 1m from the 
     television or other electrical appliances.

Recommendations for locating and using the remote control (if present) 
The remote control may be kept in a wall-mounted holder

Signal 
receptor

    Refer to picture 2:
    When  you  insert  the  batteries  for  the  first  time  in the remote 
    control or if you change them, you  need  to  program  the remote 
    control for cooling only or coo-heat.
    This is very easy: as soon as you insert the batteries, the  symbols
          (                )  and        (                )  start  fashing. If  you  push 
    whatever button when the symbol      (               ) is displayed, the 
    remote  control  is  adjusted  in only cooling mode. If  you  push 
    whatever button  when  the  symbol       (               )  is displayed, 
    the remote control is adjusted in heating mode.

9

COOL

HEAT

COOL

HEAT    

Refer to picture 1:
i.  When you insert the batteries for  the first time in the remote 
    control or if you change them, you will see a DIP switch under 
    the back cover.

ii. BE CAREFUL: After adjusting the function, you need to take 
    out the batteries and repeat again the procedure  described above.

+

+

+

 DIP switch on position  Function 

The display  is adjusted in degree celsius

The remote control is adjusted in only cooling mode 
The remote control is adjusted in only heating mode 

The display  is adjusted in degree fahrenheit.

Remote controller holder

 Cool
 Heat

C

 F