GE GCG1500RBB Benutzeranleitung

Seite von 24
8
Operating Instructions
Safety Instructions
Car
e and Cleaning
Tr
oubleshooting Tips
Consumer S
uppor
t
Before you call for service…
Troubleshooting Tips
Problem
Possible Causes
What To Do
Compactor won’t 
Compactor is unplugged
Make sure the cord is plugged securely into a 
operate
working outlet.
Circuit breaker/fuse is
Check house circuit breakers /fuses. Replace
tripped/blown
fuses or reset breaker. 
Knob switch may not be
Make sure the switch is in the ON position.
in the ON position
Foot pedal may not be lifted
Lift foot pedal up momentarily until compaction cycle 
up long enough to start cycle
starts.
Drawer may not be closed
Check to make sure the drawer is firmly closed.
Compactor has an automatic 
If you have just compacted repeatedly, this protector
thermal motor reset
may have opened the motor circuit. Wait a few 
minutes and the motor reset will reclose 
automatically.
Drawer is hard
Trash may have fallen
Remove any trash. 
to close
behind the drawer
Drawer will not
The ram is not all the
Lift up on the foot pedal and release to allow ram to 
open
way up
complete a cycle.
Little or no apparent
Drawer is not full
The drawer must be at least 1/2 full of trash before
compaction
enough
you will see any amount of compacting. The ram does
not travel all the way to the bottom. Trash in the bottom 
of the drawer will be crushed during later cycles.
Trash is stuck between ram 
Remove any trash.
and basket