HP N911a Anleitung Für Quick Setup

11

English

Set up and use fax

Connecting to a DSL/ADSL line

If you subscribe to a DSL/ADSL service, follow these steps to connect the fax.

1. Connect the DSL/ADSL filter and telephone cord provided 

by your DSL/ADSL service provider between the telephone 

wall jack and the DSL/ADSL filter.
2. Connect the telephone cord provided with the printer 

between the DSL/ADSL filter and the 1-Line port on the 

printer.

1 Telephone wall jack
2 DSL/ADSL filter and telephone cord (provided by your DSL/ADSL service 

provider)
3 Telephone cord provided in the box with the printer, connected to the 

1-LINE port on the printer

Connecting additional equipment

Remove the white plug from the port labeled 2-EXT on the back of the printer, and then connect a phone 

to this port.
If you are connecting additional equipment, such as a dial-up computer modem or a telephone, you will 

need to purchase a parallel splitter. A parallel splitter has one RJ-11 port on the front and two RJ-11 

ports on the back. Do not use a 2–line phone splitter, a serial splitter, or a parallel splitter which 

has two RJ-11 ports on the front and a plug on the back.

 Note: If you subscribe to a DSL/ADSL service, connect to the DSL/ADSL filter to the parallel splitter, 

and then use the HP-provided telephone cord to connect the other end of the filter to the 1-Line port 

on the printer. Remove the white plug from the port labeled 2-EXT on the back of the printer, and 

then connect a telephone set or telephone answering machine to the 2-EXT port. Next, connect the 

second port of the parallel splitter to the DSL/ADSL modem which is connecting to the computer. 

1 Telephone wall jack
2 Parallel Splitter
3  DSL/ADSL filter (available from your DSL/ADSL service provider)
4 Phone cord provided with printer
5 DSL/ADSL Modem
6 Computer
7 Telephone