Kegco Two Keg Commercial Grade Kegerator - Stainless Steel Gebrauchsanleitung
SHELF INSTALLATION:
1. Hook the shelf clips onto the clip hanger
2. Place the shelves on the shelf clips, making sure that all corners are seated properly.
INSTALLING THE AIR HOSE:
1. Insert the air hose into the beer tower and secure the beer tower to the cabinet with the gasket under the beer
tower.
2. In order to keep the beer faucet cold, make sure that the air hose closes to the top of the beer tower at all times.
Setting the Temperature
The Kegco Kegerator is able to maintain the proper dispensing temperature for beer, provided it is installed correctly in
the proper environment. Avoid opening and closing the door of the kegerator too often to ensure a consistent
temperature inside the unit. Beer is dispensed best between 32°F - 38°F (1°C - 3.3°C). If it is kept below or above that
range, you may experience foam issues.
To start, turn the temperature control knob to the maximum setting
(7) to achieve coldest position quickly. Allow the unit to run for 48
hours. The temperature range of the thermostat goes from 31°F to
41°F (-0.5°C to 5°C). Thereafter, adjust the thermostat to desired
temperature range. To turn off the Beer Dispenser, turn the
control knob to the “OFF” position.
CAUTION: Leaving the temperature control on the coldest setting
may cause the evaporator coil to freeze and ice up. This will
eventually result in a warmer cabinet temperature.
If you are going on vacation, you may leave the kegerator operating during vacations of less than three weeks. If the
appliance will not be used for several months, you should remove all items and turn off the appliance. Clean and dry the
interior thoroughly. To prevent mold growth, leave the door open slightly, blocking it open if necessary.
www.kegco.com
www.kegco.com
6
1-888-980-4810