Marvel 15" Built-In Ice Maker - Black Cabinet and Black Door Benutzerhandbuch

Seite von 40
Select Location
The proper location will ensure peak performance of your ap-
pliance.  We recommend a location where the unit will be out 
of direct sunlight and away from heat sources.  To assure your 
product performs to specifications the recommended installation 
location temperature range is from 65 to 90°F (18 to 32°C).
Outdoor Installation
Only the 25OiM model is suitable for outdoor installations. 
Building codes may require a ground fault circuit interrupter 
electrical receptacle to supply electrical power to the refrigerator 
for outdoor applications, (see “Electrical Connection” section). 
Do not install in a location where the unit will be exposed to 
direct sun exposure as this may result in unsatisfactory perfor-
mance.
Winterizing your Outdoor Ice Maker
In colder climates the ice maker will need to be winterized. The 
water fill valve needs to be disconnected from the water supply 
line. The water fill line from the bottom of the water fill valve will 
also need to be disconnected and drained.
With the fill valve disconnected and the fill line drained, leave 
the ice maker running and allow the unit to dump one last time 
to remove any ice from the trays.
If the unit is to be sitting for a prolonged period of time not run-
ning, it is advisable to dry out the tray with paper towels.
Front Grille
Do not obstruct the front grille. The openings within the front 
grille allow air to flow through the condenser heat exchanger. 
Restrictions to this air flow will result in increased energy usage 
and loss of cooling capacity. For this reason it is important this 
area to not be obstructed and the grille openings kept clean. 
AGA MARVEL does not recommend the use of custom made 
grilles as air flow may be restricted because of inadequate open-
ings. (See Figure 2).
Front Grille, keep 
this area open.
Rear
Leveling legs
Figure 2
Front
Leveling Legs
Cabinet Clearance
Ventilation is required from the bottom front section of the unit.  
Keep this area open and clear of any obstructions.  Adjacent 
cabinets and counter top can be installed around the unit as long 
as the front grille remains unobstructed.   
INSTALLING YOUR ICE MACHINE
4