Electrolux EI30EF45QS Installationsanweisungen

4

B. Drill Pilot Holes and Fasten Bracket - Drill a 1/8" 

pilot hole where screws are to be located. If bracket 

is to be mounted to the wall, drill pilot hole at an 

approximate 20° downward angle. If bracket is to 

be mounted to masonry or ceramic floors, drill a

3/16" pilot hole 1-3/4" deep. The screws provided 

may be used in wood or concrete material. Use a 

5/16" nut-driver or flat head screwdriver to secure
the bracket in place.

C. Level and position the range - Slide range to its 

final position. Insert the range leveling leg in the anti-

tip bracket. Visually verify if the anti-tip bracket is 

engaged. Lower the range by adjusting the 4 leveling 

legs alternatively until the range is level. Check if the 

range is level by placing a spirit level on the oven 

rack. Take 2 readings with the spirit level placed 

diagonally; take a reading in one direction and then 

in the other direction. Level the range if necessary by 

adjusting the leveling legs.