Philips Hand blender HR1379/00 HR1379/00 Benutzerhandbuch

7

 - Do not dismantle or short-circuit the batteries. Protect the batteries 

from fire, heat and direct sunlight. 

 - Never use any accessories or parts from other manufacturers or that 

Philips does not specifically recommend. If you use such accessories or 

parts, your guarantee becomes invalid.

 - If the ingredients stick to the wall of the beaker or the chopper bowl, 

switch off the appliance and loosen them with a spatula or add some 

liquid. 

 - Never fill the beaker or the chopper bowl with ingredients that are 

hotter than 80°C/175°F. 
Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic 

fields (EMF). If handled properly and according to the instructions in this 

user manual, the appliance is safe to use based on scientific evidence 

available today.

The appliance is equipped with a built-in safety system. The appliance only 

functions if you press and hold the unlock button and then press and hold 

the power-on button. Release the unlock button when the appliance starts 

to operate. As soon as you release the power-on button, the safety 

system automatically resets to its off position to protect against 

unintentional operation of the appliance.

The appliance is equipped with a built-in overheat protection. If you process 

a heavy load, the motor unit may become hot. If this happens, the built-in 

safety system switches off the appliance and the charging light lights up red. 

Let the appliance cool down for 10 minutes before you continue to use it. 

If you press the unlock button longer than 2 seconds, the indicator lights 

starts to flash red to indicate that the error mode is activated. If this 

happens release all buttons and switch on the appliance again (see step 4, in 

chapter ‘Using the appliance’).

Thoroughly clean the parts that come into contact with food before you 

use the appliance for the first time (see chapter ‘Cleaning’).

Charge the hand blender:

 - before you use the appliance for the first time, or

 - when one segment of the blue charging light flashes to indicate that the 

batteries are low. 

 1 

 Put the adapter in the wall socket.

 2 

 Put the appliance in the charging stand.  (Fig. 2)

 

, The blue charging light flashes to indicate that the appliance is 

charging (Fig. 3).

 - It takes 2.5 hours to fully charge the appliance.

 - Charge the appliance for at least 15 minutes to use it for a light blending 

job (soup, puree). 

 - When the appliance is charging, the blue charging light flashes.

 - When the batteries are fully charged, the charging light lights up blue 

continuously. 
Batteries low

 - When the batteries are low, one segment of the blue charging light 

flashes (Fig. 4).

7