Philips BTD5210/12 Benutzerhandbuch

Turn on

• Press .

The device switches to the last

selected source.

Switch to standby mode

• Press again to switch the unit to standby

mode.

The clock (if set) is displayed on the

panel.

To switch to ECO standby mode:

• Press and hold for more than two

seconds.

The display panel is dimmed.

Note

•

The unit switches to Eco Power Standby mode after 15

minutes in standby mode.

To switch between standby mode and ECO

standby mode:

• Press and hold for more than two

seconds.

Find the correct viewing

channel

Press DISC to switch to disc mode.

Turn on the TV and switch to the correct

video-in channel in one of the following

ways:

• Go to the lowest channel on your TV,

and then press the Channel Down

button until you see the blue screen.

• Press the source button repeatedly on

the remote control of your TV.

Tip

•

The video-in channel is between the lowest and highest

channels and may be called FRONT, A/V IN, VIDEO etc.

See the TV user manual on how to select the correct

input on the TV.

Select the correct TV system

Change this setting if the video is not displayed

correctly. By default, this setting matches the

most common setting for TVs in your country.

Press .

Select [Setup] (Setup) -> [Video] (Video)

-> [TV System](TV System).

Select a setting and press OK.

• [PAL] (PAL) - For TV with PAL color

system.

• [Multi] (Multi) - For TV that is

compatible with both PAL and NTSC.

• [NTSC] (NTSC) - For TV with NTSC

color system.

To return to the previous menu, press .

To exit the menu, press .

Change system menu

language

Press .

Select [Setup] (Setup) -> [General]

(General) -> [OSD Language] (OSD

Language), and press OK.

Select a setting and then press OK.

To exit the menu, press .