Philips BTD5210/12 Benutzerhandbuch

18 EN

9 Other features

Set the alarm timer

This unit can be used as an alarm clock. You can

select DISC, FM, or USB as the alarm source.

Note

•

Make sure that you have set the clock correctly.

In standby mode, press and hold TIME/

SLEEP for more than two seconds.

"The hour digits are displayed and

begin to blink.

Press / (or+/-/) repeatedly to set the

hour, and then press TIME/SLEEP .

The minute digits are displayed and

begin to blink.

Repeat step 2 to select the source, and

adjust volume.

Note

•

If no button is pressed in 90 seconds, the unit exits

timer setting mode automatically.

To activate or deactivate the alarm timer:

• In standby mode, press TIME/SLEEP

repeatedly to activate or deactivate the

alarm.

If the timer is activated, is displayed.

Tip

•

If the disc/USB source is selected, but no disc is placed

or no USB connected, the unit switches to the tuner

source automatically.

Set the sleep timer

• To set the sleep timer, when the unit is

switched on, press TIME/SLEEP repeatedly

to select a set period of time (in minutes).

When the sleep timer is activated,

is displayed.

To deactivate sleep timer:

• When the unit is switched on, press TIME/

SLEEP repeatedly until [SLP OFF] (sleep

off) is displayed.

When the sleep timer is deactivated,

disappears.

Listen to an external device

You can listen to an external device through this

unit with an 3.5mm audio cable (not supplied).

Make sure that the external audio device is

connected to this unit.

Press AUX to select the AUX IN source.

Start to play the external device (see the

user manual of the external device).