Philips BTD5210/12 Benutzerhandbuch

7

EN

3 Connect

Place the unit

  

1 

Place the unit near the TV.

2 

Place the left and right speakers at equal 

distance from the TV and at an angle 

of approximately 45 degrees from the 

listening position.

Note

 

•

To avoid magnetic interference or unwanted noise, 

never place this apparatus and speakers too close to 

any radiation devices.

 

•

Place this unit on top of a table.

 

•

Never place this unit in an enclosed cabinet.

 

•

Install this unit near the AC outlet where the AC power 

plug can be easily reached.

Connect speakers

Note

 

•

For optimal sound, use the supplied speakers only.

 

•

Connect only speakers with impedance that is the 

same or higher than the supplied speakers. Refer to the 

Specifications section of this manual.

 

1 

Hold down the socket flap.

2 

Insert the stripped part of the wire 

completely.

•  Insert the right speaker wires to "R", 

left speaker wires to "L".

•  Insert the red wires to "+", black wires 

to "-".

3 

Release the socket flap.

Connect FM antenna

Tip

 

•

For optimal reception, fully extend and adjust the 

position of the antenna.

 

•

For better FM stereo reception, connect an outdoor 

FM antenna to the FM AERIAL socket.

 

•

The device does not support MW radio reception.

•  Connect the supplied FM antenna to the 

FM AERIAL socket on the back of the 

device.