Zebra Technologies P320i Benutzerhandbuch
A
- MEDIA LOADING ORIENTATION
Card
Printer
Solutions
Printer
Solutions
General information
Getting started
Operation
Cleaning
Specifications
Appendix A
Appendix B
Troubleshooting
Printing a card
Appendix C
P320i Plastic Card Printer
The magnetic encoder is a factory installed
item with the read/write head positioned
below the card path, available with HICO
encoding (P320i CM1 or P320i CEM1) or LOCO
encoding (P320i CM2 or P320i CEM2).
item with the read/write head positioned
below the card path, available with HICO
encoding (P320i CM1 or P320i CEM1) or LOCO
encoding (P320i CM2 or P320i CEM2).
When loading cards into the Card Cartridge,
please ensure that the magnetic stripe is
facing down and closest to the rear.
please ensure that the magnetic stripe is
facing down and closest to the rear.
Also available are Printer models with the
Magnetic Read/Write head positioned above
the card path, with HICO encoding (P320i CM3
or P320i CEM3) or LOCO encoding (P320i CM4
or P320i CEM4).
Magnetic Read/Write head positioned above
the card path, with HICO encoding (P320i CM3
or P320i CEM3) or LOCO encoding (P320i CM4
or P320i CEM4).
When loading cards, please ensure that the
magnetic stripe is facing up and closest to the
rear.
magnetic stripe is facing up and closest to the
rear.
STRIPE
DOWN
STRIPE
UP
NOTE
:
M1 = Stripe Down HICO
M3 = Stripe up HICO
M2 = Stripe Down LOCO
M4 = Stripe up LOCO
Approved HICO & LOCO PVC Cards are available. (See Appendix C).
ONLY USE cards that comply with ISO 7810 &
7811 standards for magnetic stripe cards. The
magnetic stripe must be flush to the surface of
the card to work properly. Never use taped-on
magnetic stripes.
7811 standards for magnetic stripe cards. The
magnetic stripe must be flush to the surface of
the card to work properly. Never use taped-on
magnetic stripes.