Ricoh 170 / 180 Benutzerhandbuch
4-4) Push back down the green levers
while pressing the white rollers down
into place.
while pressing the white rollers down
into place.
4-5) Make sure the levers are pulled
down. Close the operation panel
until it audibly locks into place.
NOTE: If you hear an unusual noise
when you are closing the operation
panel, check the green levers have been
pulled down to the bottom.
down. Close the operation panel
until it audibly locks into place.
NOTE: If you hear an unusual noise
when you are closing the operation
panel, check the green levers have been
pulled down to the bottom.
5. Clean the Thermal head.
5-1) Lift the catch to unlock the printer cover.
Then, hold the paper guides and open the
cover.
Then, hold the paper guides and open the
cover.
5-2) Gently wipe the thermal head [E]
with the soft and damp cloth.
CAUTION: The black stripe above the
head may be wiped, but do not rub it.
with the soft and damp cloth.
CAUTION: The black stripe above the
head may be wiped, but do not rub it.
5-3) Reset the paper roll.
5-4) Close the printer cover until it audi-
bly locks into place.
bly locks into place.
6. Clean the machine’s exterior with a
clean soft dry cloth.
NOTE: Do not use a cleaning agent such benzen, washing liquid, etc.
E
DAILY CARE
92