Jackson 07610-003-13-91 A Benutzerhandbuch
5. Attach the jumper wires to the wires that you removed from the
old thermostat.
old thermostat.
6. Slide the new imperial brass fitting from your kit onto the new
thermostat.
thermostat.
7. Insert the new thermostat/brass fitting combination into the well
and tighten down the brass fitting by hand.
and tighten down the brass fitting by hand.
www.jacksonmsc.com
Rinse RegulatingThermostat Replacement Instructions
Revision A (11/16/2005)
Revision A (11/16/2005)
3
Removing the imperial brass fitting.
Attaching the jumper wires.
Sliding imperial fitting onto new thermostat.
Putting the new thermostat in the well.
Pulling the thermostat probe and fitting from the well.
Removing the wires from the thermostat.