Uniden TRUC56 Benutzerhandbuch
T R O U B L E S H O O T I N G
[ 48 ]
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first.
Symptom
Suggestion
The status LED won’t illuminate when
• Make sure the AC adapter is plugged into the base and wall outlet.
the handset is placed in the base.
• Make sure the handset is properly seated in the base.
• Make sure the charging contacts on the handset and base are clean.
• Make sure the charging contacts on the handset and base are clean.
The audio sounds weak
• Move the handset and/or base to a different location away from metal objects
and/or scratchy.
or appliances and try again.
• Press SELECT/CH to help eliminate background noise.
• Make sure that you are not too far from the base.
• Make sure that you are not too far from the base.
Can’t make or receive calls.
• Make sure you have installed the headset.
• Check both ends of the base telephone line cord.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Disconnect the AC adapter for a few minutes, then reconnect it.
• Change the digital security code (See page 44).
• Make sure that you are not too far from the base.
• Check both ends of the base telephone line cord.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Disconnect the AC adapter for a few minutes, then reconnect it.
• Change the digital security code (See page 44).
• Make sure that you are not too far from the base.
The handset doesn’t ring or receive
• The battery pack may be weak. Charge the battery on the base unit
a page.
for 3-5 hours.
• The handset may be too far away from the base unit.
• Place the base unit away from appliances or metal objects.
• Change the digital security code (See page 44).
• Place the base unit away from appliances or metal objects.
• Change the digital security code (See page 44).
Severe noise interference.
• Keep the handset away from microwave ovens, computers, remote control toys,
wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights,
and electrical appliances.
and electrical appliances.
• Move to another location or turn off the source of interference.
The Caller ID does not display.
• The handset was picked up before the second ring.
• The call was placed through a switchboard.
• Call your local telephone company to verify your Caller ID service is current.
• The call was placed through a switchboard.
• Call your local telephone company to verify your Caller ID service is current.
The handset doesn’t communicate
• Change the digital security code (See page 44).
with the base or the other handset.
• Make sure that you have registered the second handset.
The second handset can’t join
• Only one handset at a time can talk with an outside caller. To allow a different
the conversation.
handset to talk to the caller, transfer the call to the other handset.
If you still have a problem.
• Call our customer hotline at 1-800-297-1023.
TRUC56_OM 12/11/02 9:26 AM Page 48