Panasonic PV-DV852 Benutzerhandbuch
41
Creating a Title
You can create a title and record on a Memory Card.
1
Camera Mode:
Slide the [STILL/MPEG4/VOICE] Selector to [STILL] and
point the camera at the image you want to use for creating a
title.
VCR Mode:
Search for the image you want to use for creating a title and
set the Palmcorder to Still Playback Mode.
Slide the [STILL/MPEG4/VOICE] Selector to [STILL] and
point the camera at the image you want to use for creating a
title.
VCR Mode:
Search for the image you want to use for creating a title and
set the Palmcorder to Still Playback Mode.
2
Set [CARD SETUP] >> [CREATE TITLE] >> [YES].
3
Press the [PHOTO SHOT] Button.
≥The title is stored.
≥To perform PhotoShot again, select [RETURN].
≥To perform PhotoShot again, select [RETURN].
4
Rotate the [PUSH] Dial to select [LUMINANCE] and press it.
5
Rotate the [PUSH] Dial to adjust the title contrast and then
press it.
press it.
6
Rotate the [PUSH] Dial to select [COLOR] and then press it.
7
Rotate the [PUSH] Dial to select desired color and press it.
8
Select [RECORD] and then press the [PUSH] Dial.
Selecting Colors
If you make color selection by rotating the [PUSH] Dial when creating a title,
you can change the color as follows.
1) Original Color (The color of the captured image)
you can change the color as follows.
1) Original Color (The color of the captured image)
≥Title in the original color in which the dark portion (blackish portion) of
the captured image is missing.
2) Preset colors (black, blue, green, cyan, red, pink, yellow, and white)
≥Title in a preset color in which the dark portion (blackish portion) of the
captured image is missing.
3) Original color (the color of the captured image)
≥Title in the original color in which the bright portion (whitish portion) of
the captured image is missing
4) Preset colors (black, blue, green, cyan, red, pink, yellow, and white)
≥Title in a preset color in which the bright portion (whitish portion) of the
captured image is missing.
~~~~~~~~~~~~~~~~~~~~~~~~~
Inserting a Title
You can select one of your original titles and display it. (It can be displayed in
Camera Mode, VCR Mode, and Card Playback Mode.)
But when the [STILL/MPEG4/VOICE] Selector Switch is set to [MPEG4] or
[VOICE], adding a Title is not possible.
Camera Mode, VCR Mode, and Card Playback Mode.)
But when the [STILL/MPEG4/VOICE] Selector Switch is set to [MPEG4] or
[VOICE], adding a Title is not possible.
1
Press the [TITLE] Button.
≥The title that was created last is displayed.
2
Press [MULTI] Button.
≥A list of titles is displayed.
1
3
Rotate the [PUSH] Dial to select a desired title.
≥The selected title is marked with a red frame.
4
Press the [PUSH] Dial or press the [MULTI] Button.
≥The selected title is displayed.
5
Using the [TAPE/CARD] Selector, select the recording target.
Camera Mode:
TAPE or CARD
VCR Mode:
CARD
Card Playback Mode:
TAPE
6
Press the [PHOTO SHOT] Button.
≥A still picture is recorded under the inserted title.
≥If you record on a Cassette in Normal Recording Mode, set the [TAPE/
≥If you record on a Cassette in Normal Recording Mode, set the [TAPE/
CARD] Selector to [TAPE] and press the Recording Start/Stop Button.
2
File Name
Clearing a Title Display
Press the [TITLE] Button.
≥The [ACCESS] Indication appears until the titles are displayed completely.
≥The [ACCESS] Indication appears until the titles are displayed completely.
Perform the Recording after the Indication disappears.
≥For other notes, see page 63.
PHOTO
SHOT
SHOT
3
STILL
VOICE
MPEG4
CARD MODE
1
1)
2)
4)
1)
3)
1
PUSH
MENU
W.B./SHUTTER/IRIS/
VOL/JOG
VOL/JOG
SEARCH
AUTO MANUAL
2, 4, 5, 6, 7, 8
2
2
1
PUSH
W.B./SHUTTER/IRIS/
VOL/JOG
VOL/JOG
3, 4
r
TITLE
USR00002.TTL
TITLE
MULTI/P-IN-P
1
2, 4
PHOTO
SHOT
SHOT
6
5
TAPE
CARD
137P.book 41 ページ ２００２年３月１９日 火曜日 午後２時５７分