Panasonic AJ-SDX900p Benutzerhandbuch
60
Chapter 5 Preparation
5
Proceed with the flange back adjustment for the lens.
<Notes>
≥
≥
For details on how to handle the lens, refer to the
operating instructions of the lens.
operating instructions of the lens.
≥
While the lens is removed, attach the mount cap to
protect the unit.
protect the unit.
5-3
Attaching the lens and
performing the flange
back and white shading
adjustments
performing the flange
back and white shading
adjustments
Attaching the lens
1
Raise the lever for securing the lens, and detach the
mount cap.
mount cap.
Lever for
securing the lens
securing the lens
Mount cap
Mark
2
Align the center mark of the lens with the groove in the
top center of the lens mount, and attach the lens.
top center of the lens mount, and attach the lens.
4
Push the cable into the cable clamp, and connect it to the
LENS socket.
LENS socket.
3
Push down the lever for securing the lens to secure the
lens.
lens.
LENS socket
Adjusting the viewfinder’s front-back position
1
Loosen the viewfinder front-back position anchoring ring.
2
Slide the viewfinder to the front or back, and adjust it to a
position that allows easy viewing.
position that allows easy viewing.
3
Tighten the viewfinder front-back position anchoring ring.
Viewfinder front-back position anchoring ring
Removing the viewfinder
2
While pulling up the viewfinder stopper, remove the
viewfinder by sliding it in the direction of the arrow.
viewfinder by sliding it in the direction of the arrow.
3
Release the viewfinder cable and mic cable from the
cable clamps, and disconnect the cables.
cable clamps, and disconnect the cables.
1
Loosen the viewfinder left-right position anchoring ring.
Viewfinder stopper
Tighten the ring.