NordicTrack NTTL90081 Benutzerhandbuch
6
1. With the help of a second person, carefully raise the
Uprights (70) until the Wheels (30) are resting flat on the
floor.
floor.
Assembly
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Assembly
requires a phillips screwdriver (not included).
requires a phillips screwdriver (not included).
Note: The walking deck of the treadmill features a coating of high-performance lubricant. During shipping, a small
amount of this lubricant may be transferred to the top of the walking belt or shipping carton. This is a normal condi-
tion and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the
lubricant with a soft cloth and a mild, non-abrasive cleaner.
amount of this lubricant may be transferred to the top of the walking belt or shipping carton. This is a normal condi-
tion and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the
lubricant with a soft cloth and a mild, non-abrasive cleaner.
1
70
30
2. Remove the two indicated Screws (43) from the left Upright
(70).
Attach the Storage Latch (5) and the two Latch Spacers
(93) to the left Upright (70) with the two Screws (43). Be
careful not to overtighten the Screws.
(93) to the left Upright (70) with the two Screws (43). Be
careful not to overtighten the Screws.
Note: If it is difficult to fold or lower the treadmill,
remove one or both of the Latch Spacers (93).
remove one or both of the Latch Spacers (93).
2
70
93
43
5
4. Make sure that all parts of the treadmill are properly
tightened. Place a mat beneath the treadmill to
protect the floor or carpet.
protect the floor or carpet.
3. Remove the backing from the Wrench Clip (88). Press the
Wrench Clip onto the left or right Upright (70) in the indi-
cated location. Press the Allen Wrench (87) into the
Wrench Clip.
cated location. Press the Allen Wrench (87) into the
Wrench Clip.
3
70
88
89