ZyXEL Communications VMG5313-B10A/ VMG5313-B30A Benutzerhandbuch

 Chapter 8 Home Networking

VMG5313-B10A/-B30A Series User’s Guide

The following table describes the labels in this screen.

This section shows you how to use the UPnP feature in Windows 7. UPnP server is installed in 
Windows 7.  Activate UPnP on the VMG.

Make sure the computer is connected to a LAN port of the VMG. Turn on your computer and the 
VMG. 

Click the start icon, Control Panel and then the Network and Sharing Center.

Click Change Advanced Sharing Settings.

Network Setting > Home Networking > UPnP

UPnP

Select Enable to activate UPnP. Be aware that anyone could use a UPnP application to open 
the web configurator's login screen without entering the VMG's IP address (although you 
must still enter the password to access the web configurator).

UPnP NAT-T

Select Enable to allow UPnP-enabled applications to automatically configure the VMG so 
that they can communicate through the VMG by using NAT traversal. UPnP applications 
automatically reserve a NAT forwarding port in order to communicate with another UPnP 
enabled device; this eliminates the need to manually configure port forwarding for the UPnP 
enabled application. 

The table below displays the NAT port forwarding rules added automatically by UPnP NAT-T.

#

This is the index number of the UPnP NAT-T connection.

Description

This is the description of the UPnP NAT-T connection.

IP Address

This is the IP address of the other connected UPnP enabled device.

External Port

This is the external port number that identifies the service.

Internal Port

This is the internal port number that identifies the service.

Apply

Click Apply to save your changes.

Cancel

Click Cancel to exit this screen without saving.