ZyXEL Communications VMG5313-B10A/ VMG5313-B30A Benutzerhandbuch

Chapter 30 Remote Management

VMG5313-B10A/-B30A Series User’s Guide

The following table describes the fields in this screen. 

Use this screen to view a list of public IP addresses which are allowed to access the VMG through 
the services configured in the Maintenance > Remote MGMT screen. Click Maintenance > 
Remote MGMT > Turst Domain to open the following screen. 

Note: If this list is empty, all public IP addresses can access the VMG from the WAN 

through the specified services.

Maintenance > Remote MGMT > Trust Domain 

Maintenance > Remote MGMT 

WAN Interface 
used for 
services

Select Any WAN to have the VMG automatically activate the remote management service 
when any WAN connection is up.

Select Multi WAN and then select one or more WAN connections to have the VMG activate 
the remote management service when the selected WAN connections are up.

HTTP

This is the service you may use to access the VMG.

LAN/WLAN

Select the Enable check box for the corresponding services that you want to allow access to 
the VMG from the LAN/WLAN.

WAN

Select the Enable check box for the corresponding services that you want to allow access to 
the VMG from all WAN connections.

Trust Domain

If you only want certain WAN connections to have access to to the VMG using the 
corresponding services, then clear WAN, select Trust Domain and configure the allowed IP 
address(es) in the Trust Domain screen. 

Port

You may change the server port number for a service if needed, however you must use the 
same port number in order to use that service for remote management.

Certificate

HTTPS 
Certificate

Select a certificate the HTTPS server (the VMG) uses to authenticate itself to the HTTPS 
client. You must have certificates already configured in the Certificates screen.

Apply

Click Apply to save your changes back to the VMG.

Cancel

Click Cancel to restore your previously saved settings.