HP (Hewlett-Packard) HP E5200A Benutzerhandbuch
Index–1
Index
A
AAL
AAL
monitor alarms and errors, 2-30
acadia configuration, default, B-2
domain name information, B-2
host table, B-2
IP address, B-2
NFS services, B-3
TCP/IP services, B-3
user authorization, B-3
host table, B-2
IP address, B-2
NFS services, B-3
TCP/IP services, B-3
user authorization, B-3
alarms
inject, 2-48
physical, 2-51
protocol, 2-48
protocol, 2-48
log, 2-33
monitor, 2-28
monitor, 2-28
AAL, 2-30
ATM layer, 2-30
OAM, 2-30
per channel, 2-31
per link, 2-28
physical layer, 2-30
ATM layer, 2-30
OAM, 2-30
per channel, 2-31
per link, 2-28
physical layer, 2-30
ASCII to hexadecimal conversion, A-2
ATM layer
monitor alarms and errors, 2-30
AUI LAN connector, 5-6
B
backup files, 1-23, 1-24
backup files, 1-23, 1-24
create a bootable diskette, 1-23
from a notebook PC, 1-24
to a PC, 1-24
to an HP-UX workstation, 1-25
from a notebook PC, 1-24
to a PC, 1-24
to an HP-UX workstation, 1-25
BITS input connector, 5-7
BSTS conversion utility, 1-7
C
capture data, 2-38
capture data, 2-38
convert to BSTS, 2-42
capture system specifications, 5-13
category environment default configuration, B-4
change a password, 4-6
change the COM port assignments, 1-16
change the system date and time, 4-8
change the system time zone, 4-9
Channel Monitor, 2-26
cleaning instructions, iv
configuration, acadia default, B-2
configure a port, 2-18
configure the analyzer, 1-11, 2-18
configure the notebook PC or workstation, 1-10
connect the analyzer, 1-12
connect the analyzer using a modem, 1-17
connect to the system unde test
instrusive, 2-3
connect to the system under test, 2-2
diagnostic, 2-8
external loopback, 2-9
transmit loopback, 2-9
transmit loopback, 2-9
intrusive
in-line, 2-5
network element, 2-3
remote loopback, 2-4
network element, 2-3
remote loopback, 2-4
non-intrusive, 2-6
passive, 2-7
T-piece, 2-7
T-piece, 2-7
connector panel at a glance, 1-5
connectors, external, 5-4
AUI LAN, 5-6
BITS input, 5-7
serial port, 5-4
Sunc Out, 5-9
Sync In, 5-8
UTP LAN, 5-5
BITS input, 5-7
serial port, 5-4
Sunc Out, 5-9
Sync In, 5-8
UTP LAN, 5-5
create a bootable diskette, 1-23
D
data
data
capture, 2-38
replay, 2-47
view captured data, 2-38
replay, 2-47
view captured data, 2-38
data conversion, 2-42
data conversion utility, 1-7
date and time, change, 4-8
default acadia configuration, B-2
default configuration
category environment, B-4
domain name, B-2
host table, B-2
IP address, B-2
NFS services, B-3
TCP/IP, B-3
user authorization, B-3
domain name, B-2
host table, B-2
IP address, B-2
NFS services, B-3
TCP/IP, B-3
user authorization, B-3
domain name default configuration, B-2
E
electrical specifications, 5-3
electrical specifications, 5-3
power requirements, 5-3
environmental specifications
altitude, 5-15
humidity, 5-15
humidity, 5-15