AEG 301 Benutzerhandbuch
12
Troubleshooting
Power: If the electric power does not
come on, disconnect from mains
and check plugs, cable and fuses
where appropriate.
come on, disconnect from mains
and check plugs, cable and fuses
where appropriate.
Blockages/dirty filters: The cleaner
may switch itself off in the event of
a severe blockage or excessively dirty
filter(s). In such cases, disconnect
from mains and allow to cool for
20-30 minutes.
Clear blockage and/or replace
filter(s) and restart.
The clearing of blocked hoses is not
covered by the guarantee.
Please also see AEG additional
information towards the back of this
booklet.
may switch itself off in the event of
a severe blockage or excessively dirty
filter(s). In such cases, disconnect
from mains and allow to cool for
20-30 minutes.
Clear blockage and/or replace
filter(s) and restart.
The clearing of blocked hoses is not
covered by the guarantee.
Please also see AEG additional
information towards the back of this
booklet.
Water: If water is sucked into the
cleaner the motor must be changed
at an AEG Service Centre.
cleaner the motor must be changed
at an AEG Service Centre.