Chariot Carriers Corsaire XL Benutzerhandbuch

Push the two safety fl ag rods together and guide the bottom 
end of the rod through the cord loop at the back left side of 
the two-in-one weather cover. Push the end of the rod into 
the sleeve located at the lower left corner of the passenger 
compartment until it can go no further.

If you want to use your Chariot as a Bicycle Trailer, all refl ectors 
and safety fl ags must be installed.

Exception: If you use tires with refl ective strips, the spoke 
refl ectors can be left off.

Position a spoke refl ector between two outer spokes and an 
inner spoke in such a way that the inner spoke lies in the guide 
slot of the refl ector.

Guide the plastic clip with its slot over the inner spoke into the 
hole of the refl ector and secure by tightening it a quarter turn 
using a screwdriver.

Attach two 
refl ectors on each 
wheel (as shown, 
opposite each 
other to the right 
and left of the 
valve).

For fastening the front and rear refl ectors you need a Philips 
screwdriver.

Screw the red refl ectors into the rear grommets on the 
passenger compartment.

Screw the white refl ectors into the front grommets on the 
passenger compartment.