Chariot Carriers Captain XL Benutzerhandbuch

Inline skating with the Stroller is not permitted.

To attach the stroller wheel, press the plastic button on the 
side of the VersaWing 2.0 until it can go no further. Then, from 
below, insert the upward pointing caster shaft of the stroller 
wheel into the vertical hole of the VersaWing 2.0 until it can go 
no further.

Release the plastic button. This now clicks back towards the 
outside, resulting in locking of the attachment axle of the stroller 
wheel.

DANGER

Always make sure that the stroller wheels are properly and 
fully engaged and locked. To check this pull the stroller 
wheels up and down in a vertical direction. Make sure that 
the plastic locking button has fully clicked back. Incorrect 
assembly may lead to accidents. 

If you want to convert the carrier from Stroller to another CTS 
Conversion Kit, you can store the stroller wheels on the top of 
the VersaWing 2.0 .
To attach them proceed as described above. 

The caster fork arms should point forwards.

DANGER

Always make sure that the stroller wheels are fully engaged 
and locked.

DANGER

So as to prevent it from tipping backwards, the storage 
compartment at the rear of the carrier may not be loaded 
with excessive weight. Carry out the following check: push 
downwards on the handlebar by about 150 mm. The carrier 
should return to its original standing position and should not 
tip backwards.