Sterling SSL Benutzerhandbuch

Install your SS/CS Series hopper loader, apply power, press the 

 START/STOP key and 

operation begins. The hopper loader loads itself until full, then dumps and repeats, pausing 
only when the machine bin below it is full. 

The screen displays the vacuum timer while the vacuum motor is on. If the hopper loader is a 
PP proportioning model, follow the instructions in Section 5-6 below. 

Stop your hopper loader at any time by pressing the 

 START/STOP key. 

 

Series One Plus Models Only 
The proportioning feature allows layering of two materials in the machine bin below the 
hopper loader. Install the hopper loader and put both the material pickup wands in the material 
supply gaylords and follow the instructions that follow. 

 

1.

  When the standby mode displays, press the 

 SCROLL key 

until the Proportioning Menu displays as 

3

. 

2. Press 

the 

 START/STOP/SELECT/SET key to access 

Menu 3. 

The current percentage of Material B displays. 

3. Press 

the   UP key or the 

 DOWN key to change the setting 

as needed. 

4.  When the percentage of Material B you want displays, press the 

 START/STOP/ SELECT/SET key to set it. 

Press the 

 SCROLL key to leave the menu unchanged.