Meyer Sound MG-3D/M Benutzerhandbuch

PN: 05.132.036.01 B2

Page 19 of 32

Meyer Sound Laboratories Inc.
www.meyersound.com

T: +1 510 486.1166
F: +1 510 486.8356

The MLK-3D link kit is required to attach an M3D/M3D-Sub to the MG-3D/M multipurpose grid.   

In flown configurations, the first M3D/M3D-Sub cabinet in the array is always connected to the MG-3D/M grid at 0°.  In 
ground-supported configurations, the first M3D/M3D-Sub cabinet in the array can have from 0° to 5° with respect to 
the MG-3D/M grid.  In both flown and ground-supported configurations, M3D/M3D-Sub cabinets may be individually 
splayed from 0° to 5° through the selection of pin positions in accordance with your system design. The up and down 
tilt of the MG-3D/M grid and the complete array hung underneath can additionally be adjusted using chain motors, or 
differing lengths of steel cables or chain lengths.

 Always use two quick release pins (QRPs) to secure the front MTL-3D transition links to the 

MG-3D/M grid.

Labels on the left and right sides of the MG-3D/M grid denote the correct orientation of the grid for a flown or ground-
supported configuration, as well as the front and rear positions for both MILO and M3D/M3D-Sub loudspeakers. In 
addition, please note that:



The orientation of the MG-3D/M grid for a ground-supported configuration is a 180° (flipped) rotation from the 
flown position.



For M3D/M3D-Subs, the front side of the MG-3D/M grid is opposite the side used for flying MILO loudspeakers.

2

61.132.115.02

MTL-3D Transition Link

6

134.007

1/2" x 2.5" QRP*
*Includes lanyard and necessary hardware 

to fix the pin to the MG-3D/M