Moneual Lab U60 Benutzerhandbuch

10

▶

 Please make sure to check the voltage.

▶

 Please check the power outlet for proper electricity.

     Use other electrical device to check power supply.

▶

 Please make sure to grab the handle. (U60 Pro Only)

     The touch handle sensor requires you to touch the handle to operate the unit.

01

The unit does not operate at all.

▶

 Please check whether the dustbin is full.

▶

 Please make sure the suction hole is not clogged.

▶

 Please make sure not to use the unit for more than 30 minutes.

     The motor overheat protector shuts down the operation temporarily in the case above.
     Clear the clogged suction hole and use after 2-3 hours.

02

The unit stops during operation.

▶

 Please check whether any large object is lodged in the suction hole or dustbin.

▶

 Please check whether the dustbin is full.

     Remove any unwanted objects lodged in the suction hole / dustbin and empty the dustbin.

03

The suction power is reduced and it makes a vibrating noise.

▶

 Please make sure the unit is on the floor.

▶

 Please check whether the target object is a dark color. (e.g. black, dark blue)

     Rydis uses a floor detection sensor that deactivates the UV lamp if an object is a dark color or the 
     unit is lifted from the floor more than 2inch(5cm).

04

The UV lamp turns off during operation.

▶

  The exhaust hole may have a certain smell and it does not mean the product is defective. 

The unit can have a rubber smell for up to 3 months after purchase as it is a new product.

▶

  It is recommended to replace the filter earlier than advised if it smells due to dust par-

ticles and unwanted materials.

▶

 Please do not use the unit on hard surfaces as it may damage the Vibration Pads.

05

Additional information