Honeywell MS4103 Benutzerhandbuch

Seite von 268
116
VC Series Two-position Actuators
Control central heating and/or 
cooling systems, fan coil systems, 
radiators and convectors. 
Depending on the model selected, 
it can be controlled by either a low 
or line voltage SPST controller such 
as a room thermostat.
SPECIFICATIONS
Actuator Type ....................................... Valve
Control Signal ....................................... 24 Vac, 100-130 Vac, 
or 200-240 Vac
Fail Safe Mode  ..................................... Stays in place
Electrical Protection  ............................. Double Insulated
Ingress Protection Rating ..................... IP40
Electrical Connections  ......................... Plenum-rated cable (24 V); 
cable (line voltage)
Frequency  ............................................ 60 Hz
Manual operation  ................................. Lever
Mounting  .............................................. Direct Coupled
Shaft Adapter Type  .............................. Self-alignment
Stroke  ................................................... 0.4 in. (10 mm)
Supply Voltage  ..................................... 24 Vac; 100-130 Vac; 
or 200-240 Vac 3-wire.
Timing, Nominal Driving at 60 Hz  ........ 6 sec.
Power Consumption, Driving  ............... 6 VA 
Materials ............................................... Plastic housing
Operating Humidity Range (% RH) ...... 5 to 95% RH, non-condensing
Medium Temperature  ........................... 203 F (95 C)
Ambient Temperature Range  ............... 32 F to 150 F (0 C to 65 C)
Temperature Ratings (Shipping)  .......... -40 F to 150 F (-40 C to 65 C)
Storage Temperature Range ................ -40 F to 150 F (-40 C to 65 C)
Weight  .................................................. 0.57 lb (0.26 kg)
Includes  ............................................... 3/8 in. flex conduit adapter 
(24 V models)
APPROVALS
Canadian Standards Association  ........ CSA Certified: LR1322-367
CE  ........................................................ 89/336/ECC, 73/23/EEC
Underwriters Laboratories, Inc.  ........... UL Recognized, File# 
MH11826
FEATURES
• Use with two-way or three-way valves. 
• Minimal actuator power consumption. 
• Double insulated actuator. 
• Quick-connect or one meter cable electrical connections 
available. 
• Quick and easy replacement of moving parts. 
• Actuator head installation does not require draining the 
system. 
• On/Off models with six second nominal timing
• Use two-position actuators with 1000 Series 2-way and 
6000 Series 3-way VC valve bodies only. 
• All VC Series actuator-valve combinations provide 60 psi 
close-off.
Unitary Valve Actuator
VC Series Two-position Actuators