Honeywell HEGS5000 Benutzerhandbuch

3. Press 

ƒ

 or  „ keys to scroll through the available options. 

•  Standalone (control KD6/HD6 PTZs only) 
•  Mux Mode (control multiplexers, VCRs, and KD6/HD6 PTZs) 
•  System Mode (must be used with HSX3208L switcher) 
•  Stdalone/Mux Fw. (upload new firmware to the HEGS5000).  Refer to Section 7 

for uploading the latest firmware. 

•  System Firmware (upload new firmware to the HEGS5000 system controller).  

Refer to the HSX3208L User Manual to upload the latest firmware. 

4.  When the desired option is displayed, press Enter (

).  The controller continues 

booting for the selected mode. 

The power-up process is the same for both the MUX mode and the Standalone mode of 

operation.  When power is applied to the HEGS5000, the LCD displays the following 
messages: 

Rev. 1.01 

10 900.0800 

  

19-Jun-06 

 

 

 

After 5 seconds, the current application starts.  The selected mode (HEGS5000 or 

HEGS5001) is displayed. 

519685-1980  A 

   Booting in 5s 

Boot Mngr MMDDYY 

(counts down to 0)

 

 

Note:  if the configuration has been changed by the user, this screen displays, 

“Loaded Saved Configuration” 

 

Then the login screen in displayed. 

 

Two levels of login are available:  Master and Operator. 

519686-1980  A 

System login 
Password: _ _ _ _ 

HEGS5000  MMDDYY 

519686-1980  A 

HEGS5001  MMDDYY 

Enter the four-digit password to logon.  Refer to paragraph 3.3.1 for default passwords.