3com WX1200 3CRWX120695A Benutzerhandbuch
688
C
HAPTER
20: F
ILE
M
ANAGEMENT
C
OMMANDS
set boot partition
Specifies the boot partition in which to look for the system image file
following the next system reset, software reload, or power cycle.
following the next system reset, software reload, or power cycle.
Syntax —
set boot partition {boot0 | boot1}
boot0
— Boot partition 0.
boot1
— Boot partition 1.
Defaults — By default, an WX switch uses the same boot partition for
the next software reload that was used to boot the currently running
image.
the next software reload that was used to boot the currently running
image.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — To determine the boot partition that was used to load the
currently running software image, use the dir command.
currently running software image, use the dir command.
Examples — The following command sets the boot partition for the next
software reload to partition 1:
software reload to partition 1:
WX4400# set boot partition boot1
success: Boot partition set to boot1.
See Also
uninstall soda
agent
agent
Removes the contents of a directory containing SODA agent files.
Syntax —
uninstall soda agent agent-directory directory
directory
— Directory on the WX switch where soda agent files are
to be removed.
Defaults — None.
Access — Enabled.
History — MSS Version 4.2.