Sony HDCU-950 Benutzerhandbuch
3-4 (E)
HDCU-950 IMM
EX
1A F:CLS
2
1
4
3
EX
White Black
R: 0 R: 0
G: 0 G: 0
B: 0 B: 0
M: 0
BLK
γ
Flare
0 OFF R: 0
Detail G: 0
1 ON B: 0
1A F:CLS
* System Status *
HDC-950 1080/59.94I
Gen Lock : SD
DRX:1080/59.94I
FC :1080/59.94I
RC : 525/59.94I
RET1:HD SDI 59.94I
2:HD SDI 59.94I
3:HD SDI 59.94I
4:SD VBS SQ
1
2
3
4
5
6
7
8
9
2
3
4
5
6
7
8
9
3-3. Character Display Function
Page 1
Camera Lens/Filter Status Display
No.
Contents
1
Displays the setting state of the lens extender.
2
Displays the setting state of the ND filter and CC filter.
3
Displays the message when the optical reception level
lowers.
lowers.
4
Displays the setting state of the aperture of the lens.
Page 2
Camera Status Display
Contents
Displays information of White/Black/Black
γ/Flare/Detail, etc.
Page 3
System Status Display
No.
Contents
1
Displays the type of camera connected to the unit.
(HDC-950/HDC-930/UNDEFINED)
(HDC-950/HDC-930/UNDEFINED)
2
Displays the type of external sync signal.
(Free/SD/HD)
(Free/SD/HD)
3
Displays the setup format of the DRX-1 board.
*1
4
Displays the setup format of the board mounted in the
fifth slot from the left of the front side.
fifth slot from the left of the front side.
*1
5
Displays the setup format of the board mounted in the
sixth (right most) slot from the left of the front side.
sixth (right most) slot from the left of the front side.
*1
6
Displays the type of signal that is input to the RET 1
connector on the rear panel of the unit.
connector on the rear panel of the unit.
7
Displays the type of signal that is input to the RET 2
connector on the rear panel of the unit.
connector on the rear panel of the unit.
8
Displays the type of signal that is input to the RET 3
connector on the rear panel of the unit.
connector on the rear panel of the unit.
9
Displays the type of signal that is input to the RET 4
(PROMPTER) connector on the rear panel of the unit.
(PROMPTER) connector on the rear panel of the unit.
*1 : For details, refer to Section 2, “System Setup”.