Weber 92774 Bedienungsanleitung
13
MAINTENANCE
Figure 8
Figure 9
Replacing Main Burners
1.
Your Weber Gas Barbecue must be OFF and cool.
2.
Turn OFF gas at source.
3.
To remove control panel refer to “Remove the control
panel and the front panel” in the Step-By-Step Guide.
panel and the front panel” in the Step-By-Step Guide.
4.
Remove cooking grates.
5.
Remove Flavorizer bars.
6.
Remove the manifold by unsnapping the clips at the
right and left front of the cooking box. Figure 10.
right and left front of the cooking box. Figure 10.
Figure 10
Main Burner Flame Pattern
The Weber Gas Barbecue burners have been factory set
for the correct air and gas mixture. The correct flame
pattern is shown in Figure 7.
for the correct air and gas mixture. The correct flame
pattern is shown in Figure 7.
Burner
inside
cooking
box
inside
cooking
box
Figure 7
Dark blue
Light blue
Tips occasionally yellowish
Summit 4 Burner
Summit 6 Burner
If the flames do not appear to be uniform the length of the
burner tube, follow the burner cleaning procedures.
burner tube, follow the burner cleaning procedures.
Main Burner Cleaning Procedure
Turn off the gas supply. Remove the manifold.
Look inside each burner with a flashlight. Figure 8.
CAUTION: Do not enlarge the burner ports when
cleaning.
Clean the inside of the burners with a wire (a straightened
out coat hanger will work). Figure 9. Check and clean the
air shutter opening at the ends of the burners. Check and
clean the valve orifices at the base of the valves. Use a
brass bristle brush to clean outside of burners. This is to
make sure all the burner ports are fully open.
out coat hanger will work). Figure 9. Check and clean the
air shutter opening at the ends of the burners. Check and
clean the valve orifices at the base of the valves. Use a
brass bristle brush to clean outside of burners. This is to
make sure all the burner ports are fully open.