Yamaha RX-V863 Benutzerhandbuch

■ SIRIUS Satellite Radio Parental Lock 

SR PIN

Use this feature to set the code number (personal 
identification number) for the SIRIUS Satellite Radio 
Parental Lock feature to the initial factory setting. This 
feature is useful when you forget or want to change the 
current code number.
Choices: RESET, CANCEL
• Select “RESET” to set the code number to the initial 

factory setting.

• Select “CANCEL” to set the code number to the initial 

factory setting.

Even if you set “SR PIN” to “RESET”, this unit does not unlock 
the locked channels. The initial factory setting of the Parental 
Lock code number is “0000”.

■ Bi-amplifier setting   BI-AMP

Use this feature to activate or deactivate the bi-amplifier 
function (see page 16).
Choices: ON, OFF
• Select “ON” if you want to activate the bi-amplifier 

function. “SUR.B L/R SP” is set to “NONE” 
automatically, and this unit outputs the front channel 
audio signals at the SURROUND BACK/BI-AMP 
speaker terminals.

• Select “OFF” if you want to deactivate the bi-amplifier 

function.

When “BI-AMP” is set to “ON”, you can only select “FRONT 
B”, “ZONE B”, or “NONE” in “EXTRA SP ASSIGN” (see 
page 87).

■ SCENE IR code setting   

SCENE IR

Use this feature to output the remote control signals at the 
REMOTE OUT jack automatically when this unit is in the 
SCENE mode.
Choices: ON, OFF
• Select “ON” when the component connected to the 

REMOTE OUT jack is the Yamaha component and has 
the capability of the SCENE control signals. This unit 
automatically sends the remote control signals to the 
component.

• Select “OFF” when the component connected to the 

REMOTE OUT jack is not the Yamaha component and 
does not have the capability of the SCENE control 
signals.

If noises are output when you operate the SCENE function, set 
“SCENE IR” to “OFF”.

■ Monitor check   MON.CHK

Use this feature to activate or deactivate the monitor check 
function of this unit. When “MON. CHK” is set to “YES”, 
this unit receives the information of the available video 
signal resolutions from the video monitor connected via 
HDMI and you can only select the resolutions supported 
by the video monitor in “HDMI RES.” (see page 99). 
When “MON. CHK” is set to “SKIP”, you can select any 
resolution in “HDMI RES.”.
Choices: YES, SKIP

■ Tuner frequency step   

TU

Use this feature to set the tuner frequency step according 
to the frequency spacing in your area.
Choices: AM10/FM100, AM9/FM50
• Select “AM10/FM100” for North, Central and South 

America.

• Select “AM9/FM50” for all other areas.

■ Parameter initialization INIT

Use this feature to reset the parameters of this unit to the 
initial factory settings. You can select the category of 
parameters to be initialized.
Choices: DSP PARAM, VIDEO, ALL, CANCEL
• Select “DSP PARAM” to initialize all the parameters 

of the sound field programs (see page 74).

• Select “VIDEO” to initialize the parameters in 

“VIDEO SET” (see page 98) and “OSD SHIFT” in 
“DISPLAY SET” (see page 98).

• Select “ALL” to initialize all the parameters of this 

unit.

• Select “CANCEL” to cancel the initialization 

procedure.

Use “INITIALIZE” in the sound field program menu to initialize 
the parameters of the desired program (see page 74).

See page 109 for the operation of the advanced setup.