Sony PCS-1P Benutzerhandbuch
3-13
PCS-1/1P
Ethernet
Ethernet
ONU
ONU
FTTH
FTTH
Internet
Regional IP
network
Teleconference
terminal A
210.10.10.10
Teleconference
terminal A
211.10.10.10
3-7. Connection using PPPoE
Example of system
When a call is initiated from teleconference terminal A to teleconference terminal B.
1.
The LAN setup menu of teleconference terminal B is set as described below.
DHCP Mode:
DHCP Mode:
OFF
Host Name:
Blank
IP Address:
Blank
Network Mask:
Blank
Gateway Address:
Blank
DNS Address:
Blank
Gatekeeper Mode:
OFF
Gatekeeper Address:
Blank
User Alias:
Blank
User Number:
Blank
SNMP Mode:
OFF
Trap Destination:
Blank
Community:
public
Description:
Videoconference Device
Location:
Blank
Contact:
Blank
NAT Mode:
OFF
NAT Address:
Blank
Packet Resend Request: ON
Adaptive Rate Control: ON
LAN Mode:
LAN Mode:
Auto Nagotiation (This mode is changed to a proper mode when mismatching
occurs in the mode. Refer to “4-2. PCS-1/1P and Hub setting”.)
Port Number Used:
Default
TCP Port Number:
2253
UDP Port Number:
49152
TOS:
OFF
PPPoE:
ON
PPPoE User Name:
User (account) name acquired from a provider
PPPoE Password:
Password acquired from a provider
Fixed IP for PPPoE:
On (When fixed IP is acquired)
Fixed IP Address for PPPoE: 211.10.10.10
PPPoE DNS:
Obtain automatically (Acquired from a provider. Select “Set” when the
fixed DNS server address is specified. Enter the addresses specified from a
fixed DNS server address is specified. Enter the addresses specified from a
provider in “Primary DNS” and “Secondary DNS”, respectively.)