Honeywell E-EQ-MX3PLUSOGWW Benutzerhandbuch
Connecting a Tethered Scanner
Do not connect a tethered scanner cable to a USB-C or USB-H labeled endcap port. The USB ports cannot power a tethered
scanner. The tethered scanner draws power from the MX3Plus.
scanner. The tethered scanner draws power from the MX3Plus.
The MX3Plus Scan buttons have no effect on tethered bar code scanners (connected to a serial port). Tethered scanners read
bar code scans only when the trigger on the tethered scanner is pressed. The tethered scanner requires power on pin 9 of the
MX3Plus’s serial port.
bar code scans only when the trigger on the tethered scanner is pressed. The tethered scanner requires power on pin 9 of the
MX3Plus’s serial port.
To set the MX3Plus to use a tethered scanner, select Start > Settings > Control Panel > Scanner > COM1 (or 2 or 3). Tap the
“Power on Pin 9 (+5V)” checkbox for the COM port selected. The COM port that accepts the scanner data can be configured for
data rate, parity, stop bits and data bits.
“Power on Pin 9 (+5V)” checkbox for the COM port selected. The COM port that accepts the scanner data can be configured for
data rate, parity, stop bits and data bits.
3-11