Tyan Computer B5382 Benutzerhandbuch

The FT48-B5382 can be used as a standalone device when 
fitted with the supplied plastic feet. When used as a standal-
one device, the feet must be fitted to prevent the unit from 
falling over.
The four feet should be attached as follows:

1. Each foot consists of two 

pieces. Insert the round piece 
of the foot into the larger foot 
section. The small plastic tab 
on the round piece should fit 
into the curved slot on the 
other piece.

2. Use a single screw 

through the center of the 
round section to fasten 
the foot assembly to the 
bottom of the chassis. 
The plastic tab that 
protrudes through the 
curved slot should fit into 
an indent in the chassis 
case. When fitted, each foot should rotate about 90°.

3. Fit all four feet in the same way.

: When using as a standalone unit, all four feet should 

be fitted and extended fully to prevent instability.